Install Bmw Standard Tools Windows 10
Not so complicated install of BMW Tools (Windows XP, 7, and 10) - E46Fanatics. Brucemillar: 06:05 PM: Overboost Thank you. I followed your link and edited.
Part III: BMW Standard Tools 1. Extract the archive in the “BMW Standard Tools 5.0” sub-folder and run “setup.exe”, located in the “Programinstallation” folder. If you are on Windows 7, you will need to enable Windows XP compatibility mode for “setup.exe”. Use the defaults for all installation paths. Latest Sp-Daten v65 software version of Bmw standard tools available to download. Install all items in the 'Pre-Install' Folder 3. Move 'Rheingold' folder to c: program files (x86) 4. Create shortcut for IstaGUI. It is located in C: Program Files (x86) Rheingold TesterGUI bin Release 5. Move that shortcut to the 'Bmw Tools' folder from your Standard Tools' install from step 1 and rename IstaGUI to 'Ista' 6.
BMW INPA & Ediabas 5.0.2 full English version for BMW from 1998 to 2008 installation tutorial here.
The software CD will come to you with the INPA K+CAN interface, only €17 with free shipping, enjoy shopping here:
This New BMW INPA K+CAN is great designed With FT232RQ Chip has a Switch which turns LEFT is for 7 pin, RIGHT is for 8 pin (8 pin is for K-LINE protocol, old DCAN cable cannot do this).
Note: the guidance especially for Windows XP users.
Bimmer Geeks Standard Tools
Before installing, delete all version of INPA-ADS from your computer.
Insert CD to disk E: and open it, there will be a file named “INPACANinstall” which will guide you how to install in detail.
Step1: Open “01_Step1” file in the root of CD disk and copy folder “EC-APPS” onto disk C:
Step2:Run the file “01_Step1NFSEntpacktdisk1SETUP.EXE”
Choose “Windows XP” and click next
Choose “User Mode” and click next
Choose 1 -> OBD ->“Kein API-TRACE” ->“Kein IFH-TRACE” ->“Komfort(.IPO)” and click next
Then press any key to continue
This step Complete
Step3: Run the file “02_Setup2INSTALLInstprog.exe”
Choose English, press continue
While choosing the HDD disk C: for initial setup, do not change, the installation must be on drive C: only, press continue
Choose configuration “BMW Group Rectification Programs UK” and press continue
Activate all spare boxes with:
EDIABAS 6.4.3 – UPDATE
INPA 5.0.1- UPDATE
NCS Expert 3.0.8 – Complete
Press continue to start installation and press End to exit the installation
Step4: Run the file “03_Setup3INSTALLInstprog.exe”
-Choose English, press continue, press continue again
-While choosing the HDD disk C: for initial setup, do not change, the installation must be on drive C: only, press continue
-Choose configuration “BMW Group Rectification Programs UK” and press continue
-Activate all spare boxes with:
INPA 5.0.1- UPDATE
NCS Expert 3.0.8 – UPDATE
Press continue to start installation and press End to exit the installation
Step5:
Find the file C:EC-APPSINPACFGDAT named “inpa.ini” and replace it with the file “inpa.ini” that is in the root directory of CD disk
Step6: Plug the adapter into spare USB-Port and install drivers manually
Copy the “Driver_D_CAN_USB” file onto disk C:
Choose install from a list of specific location
Select the folder “Driver_D_CAN_USB”
You may install the same driver again
Complete driver installation
Then Change the number of COM-port to the value from 5 to 1, also change the value of Latency Timer from 16 to 1.
Step7: open disk C:EDIABASBINEdiabas.ini
In the file “EDIABAS.ini”
“Interface = STD:OBD” must be choosen
Step8: in the file C:WindowsOBD.INI, put the number of USB-COM-port to the value
Step9: Run the file “Driver_D_CAN_USBOBDSetup.exe”
After doing these, you should RE-BOOT the computer
Step10: test
–Connect BMW car with laptop via INPA cable ( via USB Port and OBDII port)
-Turn ignition on
-Run the INPA from: C:EC-APPSINPABINinpaload.exe
-Choose the model of BMW and type of modells you want to see
-Close the soft and disconnect the INPA cable from USB Port each time you change the car connect.
Done!
FriensI bought This Package 'Mike's Easy BMW Tools' including the correct cable and software + instructions from ebay.
It includes INPA EDIABAS and some other tools.
I wanted to run this on an old XP laptop that I have.
To give it the best shot at working I reformatted and re-installed, XP onto the Laptop and installed as per the instructions (to the letter checked and re-checked). The instructions insist that I use 'only' COM1 for the serial cable port and that you set this up in Device Manager. Done!!!!
INPA does not see the car and protests that the post is not open?
- Using the same laptop, COM 1 & cable with NavCoder, it sees that car and works perfectly.
- Device Manager sees the cable when I connect or disconnect it.
- The correct drivers are installed (as per the tools bundle).
If I install the same package from the same disc onto a WIndows 10 machine. It works?
The products is clearly sold as WinXP - WIn10 etc.
The cable is jumpered on pins 7 & 8 (I had to do this when I bought it)